sE Electronics KLS 150 Starter Set – Mic and Monitoring from One Maker

Already have an interface or a console? This set adds the two things every voice take needs: a microphone with plenty of clean level and closed headphones that keep the cue mix out of it. The XLR cable is in the box too, so one order gets you recording.

In This Setup

• sE Electronics KLS 150 – closed-back studio headphones with a custom 40 mm driver, mechanical Bass Control at the earcup, 39 Ω impedance, a 3 m locking cable, 6.35 mm and USB-C adapters and a drawstring pouch.
• sE Electronics DynaCaster DCM6 – active cardioid dynamic microphone with a built-in 30 dB DYNAMITE gain boost and balanced XLR output; needs +48 V phantom power; mic clip and pouch included.
• Hosa MBL-100 XLR Cable (3 m) – XLR-female to XLR-male microphone cable, 3 m, for a balanced connection from the DCM6 to your preamp.

Why This Combination

• Less bleed into the mic: the dual-shell KLS 150 earcups keep your cue mix away from the DCM6 while you record.
• Level without strain: the 30 dB DYNAMITE boost means your preamp does not have to run near its limit.
• Your own low end: open or close the ports on each earcup to set the bass for tracking, then lock the setting in with the covers.

Set price includes the headphones, microphone and XLR cable; needs a preamp or interface with +48 V phantom power, not included.